How to maintain serger with the basic tips
A serger is getting popular day by day, not because of the appearance but how it can make work easier and better for the people who like to sew knits most of the time. The serger can definitely help in finishing the garment in a professional way. If you are moving towards a professional sewing career then along with the best sewing machine for beginners, the serger is also important.
Today we are going to tell you about how you can maintain the serger with the basic tips.
Never Use Pins:
As a sewer, it's important for us to use the pins to connect the fabric layers with each other without creating complications. When it comes to the serger then things are pretty different because the knives of the serger are sensitive in nature. If you will use the pin in the fabric and will try to use the serger over it then the blade will be damaged and you have to repair it or replace it. Avoid using pins.
Quality Thread:
At the time of using the serger, it's extremely important to use the quality thread for the increment of the lifespan. If you have a high-quality thread then the tension will always be up to the mark and your machine will be safe from getting too much lint. To achieve the best results from the serger, it's extremely important to choose the right thread.
Cleaning:
To make sure that the serger is working efficiently and you don’t have to go through the problem of broken stitches, cleaning is the basic factor to consider. Clean the lint from the machine and use the products which can save the machine from the lint. Cleaning of the serger can enhance the performance as well as it can make the machine durable.
Visit CraftsSelection to find out the ultimate guide on the best basic sewing machine for beginners if you don't have a basic one.
Knife Replacement:
You can clearly tell when the knife of the serger needs replacement? If you will keep using the old knife for the longest time then it will just not mess with your project but it can also make the performance of the serger weak. If you are working on the professional level then don’t forget to change the blades of the serger when it becomes dim and rusty.
Vacuum Air:
For the areas where it's not possible for the brush to reach and to clean the place, you should use a small vacuum or any accessory of the vacuum. The air of the vacuum has enough power to suck the lint from the serger and can make it efficient again. You can use this trick by keeping the pressure of the air flow.
Conclusion:
It's really easy to maintain the serger when you want to enhance its life and performance as well. Along with a good sewing machine for beginners, find a good serger sewing machine for your needs and note the basic tips above.